Contact : info@construx.be or +32 89 32 88 55

Wall battery moulds for wall panels with architectural concrete finish
Project // Belgium

icon product

This precast facility has 2 overhead type wall battery moulds for producing fair-faced concrete walls

One wall battery mould is equipped with panels with overall dimensions of 7m x 3,25m.

The other battery mould is a little larger and has panels with overall dimensions of 8m x 3,5m.

The smallest battery mould is equipped with 3 movable intermediate panels and 1 movable end panel on either side of the fixed centre panel with integrated working platform. These panels can be moved manually by means of a chain drive.

This set-up creates 8 pockets to cast wall panels. Half of these pockets are equipped with a special adjustment system to position the side-forms and the bases quickly and with the required precision. The other 3 openings are fitted with box magnets and the necessary accessories to maintain the side forms in position.

The largest battery mould is equipped with 2 movable intermediate panels and 1 movable end panel on either side of the fixed centre panel with integrated working platform. These panels are moved by means of an electrical plug-in system and a remote control. This set-up creates 6 pockets to cast wall panels. All of these pockets are equipped with a special adjustment system to position the side forms and the bases with the required precision. If required, the large battery mould can be extended to 8 pockets.

Gallery